Asynchronous adaptive output feedback sliding mode control for Takagi-Sugeno fuzzy Markovian jump systems with actuator faults

In this article, the problem of asynchronous adaptive dynamic output feedback sliding mode control (SMC) for a class of Takagi-Sugeno (T-S) fuzzy Markovian jump systems (MJSs) with actuator faults is investigated. The asynchronous dynamic output feedback control strategy is employed, as the nonsynchronization phenomenon of jump modes exists between the plant and the controller. A novel asynchronous adaptive SMC approach is proposed to solve the synthesis problem for T-S fuzzy MJSs with actuator faults. Sufficient conditions for stochastic asymptotic stability of T-S fuzzy MJSs are given. Under the designed asynchronous adaptive SMC scheme, the effects of actuator faults and external disturbance can be completely compensated and the reachability of sliding surface is ensured. Finally, an example is provided to demonstrate the effectiveness of the proposed design techniques.     

316L不锈钢non-Masing特性分析和疲劳寿命预测

对316L不锈钢在不同应变范围下分别进行了293 K和873 K试验温度下的低周疲劳试验，讨论了材料循环特性的幅值相关性和温度相关性，比较了不同条件下non-Masing特性，并利用能量方法进行了低周疲劳寿命预测。实验结果表明, 在不同条件下，循环初期会出现不同程度的循环硬化现象，随后会出现循环软化、饱和直至材料失效；与873 K 试验条件相比，材料在293 K温度下的non-Masing特性更为显著；在大应变范围下，两温度下材料的non-Masing特性更加明显。采用能量方法进行疲劳寿命预测时，预测结果均位于两倍分散带内，且基于non-Masing特性得到了比基于Masing特性更为精确的预测结果。在873 K温度和大应变范围下，显著的动态应变时效效应导致考虑non-Masing与Masing特性的预测结果相差不大。     

汽车扭力梁侧倾工况性能设计

主要阐述侧倾工况下扭力梁3个重要性能指标及其设计方法,即侧倾角刚度、侧倾前束角变化梯度和侧倾外倾角变化梯度。介绍相关结构参数和性能指标,建立整车-系统-结构三级性能指标的分解关系,提出一种侧倾性能结构布置长方体设计理念,通过汇总统计扭力梁结构参数和性能指标总结其常用范围,为扭力梁的性能设计提供参考。     

How to accelerate green technology diffusion? Directed technological change in the presence of coevolving absorptive capacity

The time window for effective climate change mitigation is closing. Technological change needs to be accelerated to limit global warming to a manageable level. Path dependence of technological change is one explanation for sluggish diffusion of green technologies. Firms acquire capital that differs by technology type and build up type-specific technological know-how needed to use capital efficiently. Path dependence emerges from cumulative knowledge stocks manifested in the productivity of supplied capital and firms’ capabilities. Increasing returns arise from induced innovation feedbacks and learning by doing. Relatively lower endowments with technological knowledge are a barrier to diffusion for new technologies. This paper shows how the evolution of relative stocks of technological knowledge explains different shapes of diffusion curves. Using an eco-technology extension of the macroeconomic agent-based model Eurace@unibi, it is shown how the effectiveness of different climate policies depends on the type and strength of diffusion barriers. Environmental taxes can outweigh lower productivity and subsidies perform better if lacking capabilities hinder firms to adopt a sufficiently mature technology.     

大采高综放工作面强动压端头顶板控制技术

为了解决大采高综放工作面回风侧端头顶板控制问题,针对马道头矿8211工作面的地质情况,通过对回风顺槽超前注浆加固,提高超前支护范围和支护强度,并对回风侧端头三角区煤壁和顶板进行化学浆加固的技术方案,有效控制了顺槽超前区围岩变形和工作面回风侧端头三角区煤壁片帮,保证了工作面端头区顶板安全。     

Dynamic tensile mechanical properties and failure mode of zirconium diboride-silicon carbide ceramic composites

Dynamic indirect tension experiments were performed on zirconium diboride-silicon carbide (ZrB₂−20%SiC) ceramic. Flattened Brazilian disc specimens of ZrB₂−20%SiC were prepared to conduct dynamic tensile tests using the modified Split Hopkinson pressure bar system. The tensile experiments were completed at the range of loading rates from 7.53 to 74.71 GP s⁻¹. The tensile experimental results revealed that the zirconium diboride-silicon carbide ceramic composite is rate-sensitive in terms of the tensile strength and failure mode. The dynamic tensile strength increases linearly with the loading rate and changes from 195 MPa at 7.53 GP s⁻¹ to 654 MPa at 74.71 GP s⁻¹. Moreover, the dynamic tensile strength decreases with the increase in critical fracture time, which conforms to Tuler and Butcher's fracture criterion. In dynamic experiments, a high-speed camera was used to examine the tensile failure process, and fragments were collected to analyze the dynamic tensile failure mechanism. The tensile fracture mode of ZrB₂−20%SiC obviously showed the sensitivity of the loading rate. The fragment size of ZrB₂−20%SiC ceramic decreased but the quantity of fragments increased as the loading rate increased.     

A simple model for deep dynamic stall conditions

The present study is focused on modeling of dynamic stall behavior of a pitching airfoil. The deep stall regime is in particular considered. A model is proposed, which has a low implementation and computational complexity but yet is able to deal with different types of dynamic stall conditions, including those characterized by multiple vortex shedding at the airfoil leading edge. The proposed model is appraised against an extensive data set of experimental (α,C_L) curves for NACA0012. The results of an existing widely used model, having comparable complexity, are also shown for comparison. The proposed model is able to well reproduce not only the classic curves of deep dynamic stall but also the curves characterized by lift oscillations at high angles of attack due to the shedding of multiple vortices. Furthermore, the model appears to be robust to variations of its parameters from the optimal values and of the airfoil geometry. Finally, the model is successfully implemented in a commercial CFD software and applied to the simulation of a vertical axis wind turbine within the actuator cylinder approach. The accuracy of the prediction of the turbine power coefficient in the whole rotation cycle is very good for the optimal working condition of the turbine, for which the model parameters were calibrated. Fairly good accuracy is also obtained in significantly different working conditions without any further calibration.     

石蜡与石蜡/膨胀石墨熔化性能的实验研究

为改善相变储能过程中石蜡(PA)的熔化性能，向PA中添加少量膨胀石墨(EG)制备了4种配比的石蜡/膨胀石墨复合相变材料(PA-EG)。通过热物性分析筛选出合适配比的PA-EG，并对其和PA在水平管壳式相变储能单元中的熔化过程进行了实验研究。根据相变材料的温度场变化以及加权法计算得到的熔化分数变化，对比分析了添加EG前后PA的熔化性能，并探究了加热温度对相变材料熔化性能的影响。结果表明，PA-EG3的热导率比PA高了7倍，且两者的相变温度和潜热相差不大。PA-EG3熔化过程中的自然对流效应弱于PA，但是较高的热导率能够显著改善相变储能单元中下部的熔化，使得其整体熔化速度快于PA。当加热温度为80℃时，PA-EG3的熔化过程比PA缩短了78.16%。此外，降低加热温度会使PA和PA-EG3的完全熔化时间都显著增加，但相同条件下PA-EG3的增加幅度更小。     

巨型工程机械子午线轮胎高强度、低生热胎面基部胶配方开发

通过对国外知名品牌37.00R57和40.00R57规格巨型工程机械子午线轮胎胎面基部胶组成分析和物理性能测试,对我公司巨型工程机械子午线轮胎胎面基部胶配方进行优化设计。新开发配方半成品和成品胶料动态损耗因子分别降低37.9%和26.6%,胶料物理性能达到竞品水平,成品轮胎TKPH提升13.6%。